What amp could i use for these subs?

i have two of these hifonics hifi dual voice coils subs, these are the specs.





Subwoofer Size 12"


Voice Coil(s) Dual (2 voice coils)


Impedance (per voice coil) 4 ohms


Peak Power Handling 600 watts


RMS Power Handling 300 watts


Woofer Surround Rubber


Woofer Composition Injection Molded Polypropylene (IMPP)


Sealed Box Volume 1.25 - 2.15 cubic feet


Ported Box Volume 1.75 - 2.5 cubic feet


Sensitivity 88 dB


Frequency Response N/A


Xmax (millimeters) 11 mm


Top Mount Depth 5-3/4"


Cutout Diameter N/A


Recommended Enclosure Type Sealed or Vented


Warranty 1-year Sonic Electronix


i am looking for an amp for both of these preferably a monoblock amp, with a preamp out. possibly below 150.00 or around that price. thanks|||You should look for a mono amp that is rated at around 600 watts RMS at 2 ohms. The 2 channel lanzar isn't really a good amp. This one would work pretty well. This is probably the best you can do for under $150. http://www.sonicelectronix.com/item_9795鈥?/a>


You'll be able to run it at 4 ohms. So, there will be no issues with heat or distortion.|||wire both subs at 2 ohms then run them together for a final load of 1 ohm


check out a hi fonics brutus amp.


1500 watts


class D


awesome bang for the buck


can support your demanding 1 ohm load.


just dont go cheap and forget about your cap.


depending on your vehicle's electrical system.





hope this helps|||ye this should do the trick it shouldn't be to powerful and is cheap :)


http://cgi.ebay.com/NEW-1400-WATT-PYLE-P鈥?/a>