Again Whats The Best Amp For My 2 12'' 600 Watt Kenwood Tornaods?(So Much Writing I Couldnt Put Spaces In It)

Details On My Subs:

Nominal Input Power Rating: 600 W

Cone Style: Cone

Mounting Depth: 5.3 in

Speaker Configuration: Single Speaker

Diameter: 12 in

Nominal Impedance: 4 ohm

Cone Material: Polypropylene (Injection Molded)

General Features: Gold-Plated Terminals Vented pole piece

Magnet Weight: 42.3 oz

Sensitivity: 93 dB

Minimum Frequency Response: 25 Hz

Maximum Frequency Response: 800 Hz

Maximum Input Power Rating: 600 W



Thunder TA Series Class D Monoblock Car Amplifier

RMS Power Rating:

4 ohms: 150 watts x 1 chan.

2 ohms: 300 watts x 1 chan.

Max power output: 300 watts x 1 chan.

MOSFET power supply

Wired remote bass level control included

Thermal and short LED indicators

Tuned Bass EQ (0-12 dB bass boost at 40 Hz)

Adaptive Class D Technology: With MTX innovative approach, the amplifier鈥檚 switching energy is constantly changing and is moved away from FM radio frequency ranges as the amplifier鈥檚 load and output increases.

Thermal and short protection

StreetWires Connectors

Xtant Technologies Cooling (XTC) thermal-regulated, turbo-charged intercooler

Variable low-pass filter (at 80 or 120 Hz, 24 dB/octave)

CEA-2006 compliant amplifier

Dimensions: 12-11/16"L x 9-5/8"W x 2-1/2"H

4 or 8-gauge power and ground leads recommended. Contact us for information regarding a discount on a select amplifier kit when purchased together.

1-year Sonic Electronix warranty

Monoblock Class A/B Amplifier with Bass Level Control

RMS Power Ratings:

1 ohm: 600 watts x 1 channel

2 ohms: 300 watts x 1 channel

4 ohms: 150 watts x 1 channel

Hifonics New Illuminated Heat-Sink Design With Blue LED Light Pumps

Hifonics Blue Illuminated Logo

Maxxsonics Illuminated "M" End Panel Logo

Heavy-Duty Ultra-Fi" MOSFETS

Highly Efficient Super D-Class Amplifier Circuitry With Oversized MOSFET Output

Fully Adjustable Accu-Cross" Crossovers

卤18dB Variable Bass Equalization @ 45Hz

180掳 Variable Phase Control (15 to 35Hz)

Dash-Mountable Bass Remote Control Included

Variable 24dB Subsonic Filter

Brutus Pulse Wave Modulated MOSFET EXVP (Exponential Vari-Power Supply)

Twin-Turbo Torroid Coil Design

HSMD Hifonics Surface Mount Design

Balance Line Inputs for our 18-Volt Line Drivers

RCA Line Output for Amplifier Daisy Chaining

Gold 4-Gauge Power Connectors

Dimensions: 9.84"L x 10.39"W x 2.63"H

1-year Techronics.com warranty

Kenwood KAC-8104D 1-Channel Car Audio Amplifier Power:

300 Watts x 1 @ 4 Ohm

500 Watts x 1 @ 2 Ohm

MOSFET power supply

LED power indicator

Tuned Bass EQ (0-18 dB bass boost at 40 Hz)

Speaker-level inputs with signal sensing for automatic turn-on)

Preamp RCA outputs

Short circuit, DC offset, overload, and thermal protection circuitry

Aluminum die cast heat sink

Built-in cooling fan

Gold-plated RCA level inputs

Gold-plated screw terminals

Variable low-pass filter (50-200 Hz, 24 dB/octave)

CEA-2006 compliant amplifier

Frequency response: 5-200 Hz

Subsonic Filter (15/25 Hz, 18 dB/ Octave)

THD: 0.8%

Dimensions: 11-1/16" Width x 2-3/8" Height x 9-7/8" Depth

Kenwood KAC-8103D 1-Channel Car Audio Amplifier Class D Monoblock Amplifier

Maximum Output Power: 1000 watts

RMS Power Output:

300 watts x 1 channel @ 4 ohms

500 watts x 1 channel @ 2 ohms

2 ohm stable

Frequency Response: 5 Hz-200 Hz

Low-Pass Filter: 50 Hz-200 Hz, 24 dB/Octave

Variable Input Sensitivity: 200 mV - 5 V

Line Output Terminals for Extension

Infrasonic Filter: 15 Hz, 25 Hz, 18 dB/Octave

Bass Boost: 0-18 dB

Fuse Rating 40A x 1

Signal-to-Noise Ratio 85 dB

THD @ Rated RMS Power 1%

Dimensions: 11-1/4" Length x 2-1/2" Height x 12-1/2" Width

1 Year Techronics Warranty!

Kicker 06ZX300.1 1-Channel Car Audio Amplifier RMS Power: 150W x 1 @ 4 ohms

RMS Power: 300W x 1 @ 2 ohms

THD at 4-Ohm RMS Power: %26lt;1 %

Speaker Level Inputs: Yes

Preamp Outputs: Yes

Built-In Crossovers: LP

Bass Boost: 0 or 12 dB

Frequency Response: 20-200 Hz

Signal to Noise Ratio: 100 dB

Advanced chassis with extruded aluminum heatsink

MOSFET class A/B power supply

Top-mounted controls

Switchable KickBass 12 dB bass boost at 40 Hz

80 Hz low-pass crossover with 24 dB/octave slope

Built-in 25 Hz subsonic filter

High level or low level inputs (125mV-10V)

PreAmp Signal Transfer (PAST) RCA outputs

Delayed turn-off logic circuit

Soft start turn-on circuit for reduced startup load

Short circuit, Over-voltage, Reverse polarity, Thermal overload (SORT) protection

2 -Year Techronics.com Warranty

Pioneer GM-7300M 800 Watts Monoblock Car Audio Amplifier800W Max, MonoBlock Amplifier

RMS Power Output: 4 ohms: 250 watts x 1 channels

RMS Power Output: 2 ohms: 360 watts x 1 channels

PWM Regulated MOSFET Power Supply

Screw-Type Speaker Terminals

Balanced Isolator Input Circuit

RCA Inputs

Speaker Level Input

Input Level Control

Built-in Crossover

Crossover Frequency Range: 40 Hz - 240 Hz

Bass Level Control: 50 Hz

Frequency Response: 10 Hz - 240 Hz

Dimensions: 11-13/16"L x 13-1/8"W x 2-3/8"H

1-tear Techronics.com warrantyAgain Whats The Best Amp For My 2 12'' 600 Watt Kenwood Tornaods?(So Much Writing I Couldnt Put Spaces In It)
1 600watt so theres only 300 watts going to them that way they'll last longer because 12'' speakers have a trampoline effetc which over time can cause tearing if maxed out all the time.