Whats The Best Mono Amp For My 2 12'' 600 Watt Kenwood Tornados?

Hifonics BXi606 1-Channel Car Audio Amplifier

Monoblock Class A/B Amplifier with Bass Level Control

RMS Power Ratings:

1 ohm: 600 watts x 1 channel

2 ohms: 300 watts x 1 channel

4 ohms: 150 watts x 1 channel

Hifonics New Illuminated Heat-Sink Design With Blue LED Light Pumps

Hifonics Blue Illuminated Logo

Maxxsonics Illuminated "M" End Panel Logo

Heavy-Duty Ultra-Fi" MOSFETS

Highly Efficient Super D-Class Amplifier Circuitry With Oversized MOSFET Output

Fully Adjustable Accu-Cross" Crossovers

卤18dB Variable Bass Equalization @ 45Hz

180掳 Variable Phase Control (15 to 35Hz)

Dash-Mountable Bass Remote Control Included

Variable 24dB Subsonic Filter

Brutus Pulse Wave Modulated MOSFET EXVP (Exponential Vari-Power Supply)

Twin-Turbo Torroid Coil Design

HSMD Hifonics Surface Mount Design

Balance Line Inputs for our 18-Volt Line Drivers

RCA Line Output for Amplifier Daisy Chaining

Gold 4-Gauge Power Connectors

Dimensions: 9.84"L x 10.39"W x 2.63"H

1-year Techronics.com warranty

MTX Audio TA2301 Thunder 2301

300W RMS, Class D Monoblock Amplifier Thunder2301 Product DescriptionThunder TA Series Class D Monoblock Car Amplifier

RMS Power Rating:

4 ohms: 150 watts x 1 chan.

2 ohms: 300 watts x 1 chan.

Max power output: 300 watts x 1 chan.

MOSFET power supply

Wired remote bass level control included

Thermal and short LED indicators

Tuned Bass EQ (0-12 dB bass boost at 40 Hz)

Adaptive Class D Technology: With MTX innovative approach, the amplifier鈥檚 switching energy is constantly changing and is moved away from FM radio frequency ranges as the amplifier鈥檚 load and output increases.

Thermal and short protection

StreetWires Connectors

Xtant Technologies Cooling (XTC) thermal-regulated, turbo-charged intercooler

Variable low-pass filter (at 80 or 120 Hz, 24 dB/octave)

CEA-2006 compliant amplifier

Dimensions: 12-11/16"L x 9-5/8"W x 2-1/2"H

4 or 8-gauge power and ground leads recommended. Contact us for information regarding a discount on a select amplifier kit when purchased together.

1-year Sonic Electronix warranty

Amplifier Specifications:



Amplifier Class D

Number of Channels 1 - Mono

RMS Power (4 ohms) 150 watts x 1 channel

RMS Power (2 ohms) 300 watts x 1 channel

RMS Power (1 ohm) Not Stable

Bridged RMS Power N/A

Peak Power Output N/A

Minimum Impedance Unbridged 2 ohms

Minimum Impedance Bridged Not Bridgeable ohms

THD at Rated RMS Power .5%

Speaker Level Inputs No

Preamp Outputs Yes - 1 pair

Built-in Crossover Low-pass (LP)

High-Pass Crossover Frequency N/A

Low-Pass Crossover Frequency 80

Subsonic Filter N/A

Signal-to-Noise Ratio 73 dB

Channel Separation N/A

Bass Boost 0 - 12 dB

Bass/Gain Remote Yes

Fan Cooled Yes

Fuse Rating 20A x 2

2000W Pyle Dryver PLAD413 4 Ch High Power MOSFET AmpBrand New Pyle Dryver PLAD413 2000 Watt 4 Channel High Power MOSFET Amplifier

4x 200W RMS at 4 Ohms

4x 500W MAX at 4 Ohms

2x 800W MAX at 4 Ohms Bridged

4x 350W RMS at 2 Ohms

Electronic Crossover Network

Bass Boost Circuit

Bridgeable at 4 Ohms

2 Ohm Stereo Stable

Tri-Mode Capable

Gold Plated RCA Inputs

Line Outs for 1 and 2 Channel

Low Pass Filter Control

High Pass Filter Control

Remote Bass Level Control

Power and Protection LED Indicators

Red Lighting Illumination

Side Leg Mounting

THD: %26lt;0.04%.

S/N Ratio: %26gt;90dB

Input Sensitivity : 100mV ~4V

Channel Separation : %26gt;65dB

Freq. Response : 10Hz ~ 30KHz

Patent Pending

Soft Turn-on/Turn-off

Dimensions : 8.6''(W) x 2.74''(H) x 12.6''(L)

Item Manual: PLAD413 Click HereWhats The Best Mono Amp For My 2 12'' 600 Watt Kenwood Tornados?
alot of people would say the MTX one only due to being CEA..personallly i still would not use thier amps if given to me.....tech support, HA...Company policys HAHA, support to dealers HAHAHA....



or maybe that was just the Canadian distribution ....