The Peak Is 1500 %26amp; Rms Is 750. Since I Buying 3 The Total Rms Is 2250. I Dont Want 2 Spend More Than 300 Dollars On A Mono Block Amp So Heres The 2 Top Ones. Which Will B The Loudest %26amp; Best Please Look.
Hifonics BXi 2006D
Below Is The Specs!
Product Description:
Super D-Class Monoblock Amplifier
RMS Power Ratings:
1 ohm: 2000 watts x 1 channel
2 ohms: 1300 watts x 1 channel
4 ohms: 650 watts x 1 channel
BXi AccuCross鈩?active electronic cross-over permits full adjustment of:
Bass EQ, Subsonic Filter, Low-Pass %26amp; Phase Shift features
RCA Input level control permits matching the amplifier input level (gain) to the CD/Receivers output level. Or the Balanced Input will accept BLD Line-Driver levels from 4 to 18-volts.
The Brutus BXi bass remote controls the subwoofer output signal from the drivers seat.
For multi-amp daisy chaining, the RCA line inputs transfer the pure untouched audio signal directly to the line output RCA jacks, bypassing any crossover settings
Hifonics New Illuminated Heat-Sink Design With Blue LED Light Pumps
Hifonics Blue Illuminated Logo
Maxxsonics Illuminated "M" End Panel Logo
Heavy-Duty Ultra-Fi鈩?MOSFETS
Highly Efficient Super D-Class Amplifier Circuitry With Oversized MOSFET Output
Fully Adjustable Accu-Cross鈩?Crossovers
卤18dB Variable Bass Equalization @ 45Hz
180掳 Variable Phase Control (15 to 35Hz)
Dash-Mountable Bass Remote Control Included
Variable 24dB Subsonic Filter
Brutus Pulse Wave Modulated MOSFET EXVP (Exponential Vari-Power Supply)
Twin-Turbo Torroid Coil Design
HSMD Hifonics Surface Mount Design
Balance Line Inputs for our 18-Volt Line Drivers
RCA Line Output for Amplifier Daisy Chaining
Gold Oversized 2-Gauge Power Connectors
Dimensions: 16.50"L x 10.39"W x 2.63"H
1-year Sonic Electronix warranty
Amplifier Specifications:
Number of Channels 1 - Mono
RMS Power (4 ohms) 650 watts x 1 channel
RMS Power (2 ohms) 1300 watts x 1 channel
RMS Power (1 ohm) 2000 watts x 1 channel
Bridged RMS Power Not Bridgeable
Peak Power Output N/A
Minimum Impedance Unbridged 1 ohm
Minimum Impedance Bridged Not Bridgeable ohms
THD at Rated RMS Power %26lt;0.1%
Speaker Level Inputs Yes
Preamp Outputs Yes - 1 pair
Built-in Crossover Yes - LP
High-Pass Crossover Frequency N/A
Low-Pass Crossover Frequency 35 - 250 Hz
Subsonic Filter 15 - 50 Hz
Signal-to-Noise Ratio %26gt;95 dB
Channel Separation N/A
Bass Boost 0 - 18 dB
Bass/Gain Remote Yes
Fan Cooled N/A
Fuse Rating N/A
THIS IS THE END OF THE HIFONICS MONO AMP UP NEXT IS THE POWER ACOUSTIK! MONO AMP I LEFT THIS MMESSAGE BECAUSE I USED ALL THE CAPS THE ONLY WAY I CAN FIT EVERYTHING ON HERE IS COPY %26amp; PASTE SO LIKE I SAID THIS IS HE END OF THE AMP. BELOW IS THE NEXT AMP THANKS FOR READINGPower Acoustik SL-3400D
3400W Max, Class D Monoblock Amplifier (SL3400D)Product Description:
3400 watts, Class D Monoblock Amplifier
RMS Power Output:
4 Ohms: 1400 watts x 1
2 Ohms: 2100 watts x 1
1 Ohm: 2600 watts x 1
High Speed Digital Circuitry
Fully Regulated PWM Power Supply
Four Way Protection Circuit
1 Ohm Stable
Bridging Synchronization
System Distress Indicator
Mono Speaker Output Connector
Variable Bass Control(0 - 18 dB)
Remote Dash Mount Low Level Gain Control
Nickel Plated Heavy Duty Power %26amp; Speaker Terminals
Dimensions: 19.1"L x 11.7"W x 3"H
1-year Manufacturer's warranty
Amplifier Specifications:
Amplifier Class D
Number of Channels 1 - Mono
RMS Power (4 ohms) 1400 watts x 1 channel
RMS Power (2 ohms) 2100 watts x 1 channel
RMS Power (1 ohm) 2600 watts x 1 channel
Bridged RMS Power N/A
Peak Power Output 3400 watts x 1 channel
Minimum Impedance Unbridged 1 ohm
Minimum Impedance Bridged N/A
THD at Rated RMS Power 0.50%
Speaker Level Inputs N/A
Preamp Outputs Yes - 1 pair
Built-in Crossover Low-pass (LP)
High-Pass Crossover Frequency N/A
Low-Pass Crossover Frequency 50 - 150 Hz
Subsonic Filter 15 - 40 Hz
Signal-to-Noise Ratio 100 dB
Channel Separation N/A
Bass Boost 0 - 18 dB
Bass/Gain Remote Yes
Fan Cooled No
Fuse Rating 30A x 5Kicker: Choosing Amps?
i wouldn't get either one of those amps. from reading the specs they are trying to say the an amp with 150 amps of fuses will make over 2000 watts rms...... i don't believe it. my ZX1500.1 takes a 150 amps of fuses. if you really want to get your power get a CEA-2006 compliant amp and stop trying to be cheap. get a ZX2500.1 and get the 4 ohm subs so you can stay with in the amps ohm limit. the first amp doesn't even say the fuse rating..... i just don't trust it.Kicker: Choosing Amps?
HifonicsKicker: Choosing Amps?
wow. That is alot of info. I would buy the first power acoustic. I owned one, and believe it or not I really liked it. Really good for the money. I would buy the dual 2 ohm model and wire it in series/parallel to be stable for that amp.
have fun!
frist it is not good on the amp to push more than 2 speakers on a mono block but if you do i would go ahead an buy a zx750.1 or zx1000.1 off of ebay its cheaper and you still have the kicker name and warrty if you by from the right people
No comments:
Post a Comment